Enable High Contrast Mode
Disable High Contrast Mode
Cleanstream H3000
In-line precision heater for chemical baths and high purity fluids
Why choose Cleanstream H3000
- Our heater-only Cleanstream model for precise control of corrosive chemicals or high purity fluids
- HDPFA Teflon® wetted surfaces on process side for ultra-high purity or corrosive fluids
- Eliminates possibility of metal contamination in baths
- 3,000 watts of heating capacity
- ±0.2°C control capability
- Temperature control from 40°C to 90°C
- 10x better response time than PFA Teflon compatible compressor-based heaters
- Designed for easy integration inside most wet bench systems
- Simple design – no moving parts
- Powered using our highly reliable Switchback power supply (sold separately)
- Ideal for H2SO4/H2O2, SC1, SC2, electroplating baths or other fluids compatible with PFA Teflon®
Performance
Specifications
Operating Range:
40°C to 90°C
Ambient Temperature:
10°C to 40°C non-condensing
Stability / Repeatability:
± 0.2°C (with typical configuration)
Heating Capacity:
3,000 Watts
Process Fluid:
Ideal for H2SO4 / H2O, SC1, SC2 electroplating baths or other PFA Teflon compatible fluid
Process Fittings:
3/4" or 1" Flaretek, or Teflon tube stub
Process Flow Rates:
4-10 gpm (15-38 lpm) with parallel flow
0.5-2 gpm (2-8 lpm) with series (low flow) option
0.5-2 gpm (2-8 lpm) with series (low flow) option
Maximum Pressure:
90 psig @ 40°C, 55 psig @ 90°C
Wetted Materials:
Process: HDPFA Teflon
Size (L x W x H):
18" x 11" x 5" (46 cm x 28 cm x 13 cm) with insulation
16" x 10" x 3" (41 cm x 25 cm x 8 cm) without insulation
16" x 10" x 3" (41 cm x 25 cm x 8 cm) without insulation
Weight
40 lbs (18 kg)
Power Requirements
(separate unit):
(separate unit):
Switchback 6600 CE or 6600 PSTC
set to 0-144 VDC, 0-24 Amps
set to 0-144 VDC, 0-24 Amps
Standards
Semi S2-0200, F47 compliant, CE
Warranty:
2 years
*Note: Heating capacity will vary with configuration and faclity water temperature / flow rates