Enable High Contrast Mode
Disable High Contrast Mode
Cleanstream 550/H1500
Wide range temperature control for applications needing both cooling and heating
Why choose Cleanstream 550/H1500?
- Patented Liquid-Liquid thermoelectric heat exchanger for precise control of corrosive chemicals or high purity fluids
- HDPFA Teflon® wetted surfaces on process side for ultra-high purity or corrosive fluids
- Eliminates possibility of metal contamination in baths
- Combines the benefits of a Cleanstream 1100 and a Cleanstream H3000 – cooling on one side, heating on the other
- Equivalent to 1,250 watt chiller or 1,500 watt heater
- ±0.05°C control capability
- Temperature control from 10°C to 90°C
- Designed for easy integration inside most wet bench systems
- 10x better response time than PFA Teflon compatible compressor-based chillers/heaters
- All thermoelectric for high reliability – no compressor, no Freon
- Simple design – no moving parts
- Facility water (PCW) cold plate is sealed hard anodized for corrosion resistance
- Powered using our highly reliable Switchback power supply (sold separately)
- Perfect for HF baths, electroplating baths, corrosive chemical baths or high purity liquids
Performance
Specifications
Operating Range:
10°C to 90°C
Ambient Temperature:
10°C to 40°C non-condensing
Stability / Repeatability:
± 0.05°C (with typical configuration)
Cooling Capacity*:
550 Watts @ 25°C with 20°C facility water
Heating Capacity*:
1,500 Watts @ 25°C with 20°C facility water
Process Fluid:
Up to 50% HF solution, organic solvents,
other PFA Teflon compatible fluids
other PFA Teflon compatible fluids
Process Fittings:
1" Flaretek, or Teflon tube stub
Process Flow Rate:
4-10 gpm (15-38 lpm) w/parallel flow (4:1 fittings)
0.5-2 gpm (2-8 lpm) with series flow (low flow option)
0.5-2 gpm (2-8 lpm) with series flow (low flow option)
Facility Water Fittings:
3/8" Female NPT
Facility Water:
2-4 gpm (8-15 lpm) @ 10-35°C filtered, treated recirculating facility cooling water, pH 6.5 to 8.2
Maximum Pressure:
Process: 90 psig @ 40°C, 55 psig @ 90°C
Facility: 100 psig
Facility: 100 psig
Wetted Materials:
Process: HDPFA Teflon
Facility: Sealed hard anodized aluminum
Facility: Sealed hard anodized aluminum
Size (L x W x H):
18" x 11" x 5" (46 cm x 28 cm x 13 cm) with insulation
16" x 10" x 3" (41 cm x 25 cm x 8 cm) without insulation
16" x 10" x 3" (41 cm x 25 cm x 8 cm) without insulation
Weight:
38 lbs (17 kg)
Power Requirements
(separate unit):
(separate unit):
Two (2) Switchback 6600 CE or 6600 PSTC units
set to 0-144 VDC, 0-12.5 Amps
set to 0-144 VDC, 0-12.5 Amps
Standards:
Semi S2-0200, F47 compliant, CE
Warranty:
2 years
*Note: Cooling and Heating capacity (per side) will vary with configuration and faclity water temperature / flow rates