Cleanstream 1100

Higher capacity temperature control of chemical baths and high purity fluids

Contact us for a quote

Why choose Cleanstream 1100?

  • Patented Liquid-Liquid thermoelectric heat exchanger for precise control of corrosive chemicals or high purity fluids
  • HDPFA Teflon® wetted surfaces on process side for ultra-high purity or corrosive fluids
  • Eliminates possibility of metal contamination in baths
  • Equivalent to 2,500 watt chiller or 1,100 watt heater
  • ±0.05°C control capability
  • Temperature control from 5°C to 40°C
  • 10x better response time than PFA Teflon compatible compressor-based chillers
  • Designed for easy integration inside most wet bench systems
  • Up to 95% more energy efficient than compressor-based chillers with 10X better response time near ambient control
  • All thermoelectric for high reliability – no compressor, no Freon
  • Simple design – no moving parts
  • Facility water (PCW) cold plate is sealed hard anodized for corrosion resistance
  • Powered using our highly reliable Switchback power supply (sold separately)
  • Perfect for HF baths, electroplating baths, corrosive chemical baths or high purity liquids

Performance

Cleanstream Schematic

Cleanstream 1100 Capacity Curves

Cleanstream 1100 Pressure Drop

Cleanstream 1100 Power Consumption

Specifications

Operating Range:
5°C to 40°C
Ambient Temperature:
10°C to 40°C non-condensing
Stability / Repeatability:
± 0.05°C (with typical configuration)
Cooling Capacity*:
1,100 Watts @ 25°C with 20°C facility water
Heating Capacity*:
1,100 Watts @ 25°C with 20°C facility water
Process Fluid:
Up to 50% HF solution, organic solvents,
other PFA Teflon compatible fluids
Process Fittings:
3/4" or 1" Flaretek, or Teflon tube stub
Process Fluid Flow Rate:
4-10 gpm (15-38 lpm) with parallel flow
0.5-2 gpm (2-8 lpm) with series flow (low flow option)
Facility Water Fittings:
3/8" Female NPT
Facility Water:
3-6 gpm (11-23 lpm) @ 10-35°C filtered, treated recirculating facility cooling water, pH 6.5 to 8.2
Maximum Pressure:
Process: 90 psig
Facility: 100 psig
Facility Water Fittings
3/8" Female NPT
Wetted Materials:
Process: HDPFA Teflon
Facility: Sealed hard anodized aluminum
Size (L x W x H):
18" x 11" x 5" (46 cm x 28 cm x 13 cm) with insulation
16" x 10" x 3" (41 cm x 25 cm x 8 cm) without insulation
Weight:
38 lbs (17 kg)
Power Requirements
(separate unit):
Switchback 6600 CE or 6600 PSTC
set to 0-144 VDC, 0-24 Amps
Standards:
Semi S2-0200, F47 compliant, CE
Warranty:
2 years
* Note: Cooling and Heating capacity will vary with configuration and faclity water temperature / flow rates